PHILIPS HEARTSTART ONSITE DEFIBRILLATOR #M5066A

Category:
Item Number: PHI-M5066A

$1,275.00

Available on backorder. Please allow 2-5 days for shipping

Need Help?
 773-278-1440
With access to the right equipment, training and support, you can help save a life. Philips HeartStart OnSite defibrillator guides you through the process of treating a victim of suspected sudden cardiac arrest.¹ The OnSite AED provides real-time guidance through step-by-step voice commands and CPR guidance.¹

With access to the right equipment, training and support, you can help save a life. Philips HeartStart OnSite defibrillator guides you through the process of treating a victim of suspected sudden cardiac arrest.¹ The OnSite AED provides real-time guidance through step-by-step voice commands and CPR guidance.¹

Description

With access to the right equipment, training and support, you can help save a life. Philips HeartStart OnSite defibrillator guides you through the process of treating a victim of suspected sudden cardiac arrest.¹ The OnSite AED provides real-time guidance through step-by-step voice commands and CPR guidance.¹

 

Features:

Guides you through every step

Just pull the green handle to activate your OnSite defibrillator, and voice instructions will guide you through the entire process – from placing each pad on the patient to performing cardiopulmonary resuscitation (CPR) and delivering a defibrillation shock.¹ It even guides you on the frequency and depth of chest compressions, as well as breaths.¹

Ready to use the moment it arrives

With OnSite’s Ready-Pack configuration arrives virtually ready to use. – Arrives with the SMART Pads cartridge and battery already installed – Is positioned inside the carry case with a spare SMART Pads cartridge in place – Just pull the green tab to launch the initial self-test – Conducts a series of automatic self-tests daily, weekly, and monthly, including testing the pads

Use OnSite to train

You can install a special pads cartridge that temporarily turns your OnSite defibrillator into a trainer. Also available are a collection of videos that describe every aspect of the defibrillator.

Easy as 1-2-3

When you observe someone suffering from a suspected SCA, you should act quickly. We’ve equipped OnSite with integrated SMART Pads. Just place the SMART Pads on the person’s bare skin, and they will provide feedback to the AED so it can adapt its voice instructions to your actions and your pace. The SMART Pads sense when they have been placed on the patient and when you’ve completed each step. The system won’t announce the next step until you are ready. Prompts are repeated and rephrased, and include additional instruction to aid understanding.

Specifications

Battery
Type
  • 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
Capacity
  • Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
Install-by Date
  • Battery is labeled with an install-by date of at least five years from date of manufacture
Standby Life
  • Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)

 

Product Specifications
Kit Contents
  • Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner’s manual, quick reference guide
Waveform
  • SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
Defibrillation peak current – Adult
  • 32 A (150 J nominal) into a 50 ohm load
Defibrillation peak current – Pediatric
  • 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds between shocks in a series
Quick Shock
  • Able to deliver a shock after the end of a CPR interval, typically in eight seconds
Voice Instructions
  • Detailed voice messages guide responder through use of the defibrillator
CPR Guidance
  • Instructions for adult and infant/child CPR available at user selection
Shock Delivery
  • Via adhesive pads placed on patient’s bare skin as illustrated on pads
Controls
  • Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
Indicators
  • Ready light, blue i-button, caution light

 

Environmental/Physical Requirements
Standby Temperature
  • 0 – 43 °C (32 – 109 °F)
Operating Humidity
  • 0 to 95 % relative humidity (non-condensing)
Standby Humidity
  • 0 to 75 % relative humidity (non-condensing)
Standby Altitude
  • <gt/> 48 hours from 0 to 8,500 ft and <lt/>48 hours from 8,500 to 15,000 ft
EMI (Radiated/Immunity)
  • Meets EN55011 Group 1 Level B Class B and EN61000-4-3

 

SMART Pads
Energy delivered
  • Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
How Supplied
  • Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
Active Surface Area
  • 85 cm² (13.2 in²) each
Cable Length
  • Adult pads: 137 cm (54″); Infant/Child pads: 102 cm (40″)
Use-by Date
  • Cartridge is labeled with a use-by date of at least two years from date of manufacture
Training pads (optional)
  • Special pads put HeartStart OnSite into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins

 

Environmental/Physical Requirements
Sealing
  • Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
Operating Temperature
  • 0 – 50 °C (32 – 122 °F)
Operating Altitude
  • 0 to 4,500 m (0 to 15,000 ft)
Shock/Drop Abuse Tolerance
  • Withstands 1 meter drop to any edge, corner, or surface
Vibration
  • Meets EN1789 random and swept sine, road ambulance specification in operating and standby states

 

Automated and User-activated Self-tests
Daily Automatic Self-tests
  • Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
Pads Integrity Test
  • Specifically tests readiness-for-use of pads (gel moisture)
Battery Insertion Test
  • Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
Status Indicator
  • Blinking green “Ready” light indicates ready for use. Audible “chirp” indicates need for maintenance

 

Data Recording and Transmission
Infrared
  • Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
Data Stored
  • First 15 minutes of ECG and the entire incident’s events and analysis decisions

  

Additional information

Weight 10 lbs
Dimensions 12 × 12 × 12 in